PLA0M3D002

3D / 530lm / 17h


3D-Cell Colour Changing LED Lantern, with Innovative Candle Light Mode


Available in 1 colour
  • BATTERY POWER INDICATION
  • As Downlight
LED Colour-Changing
  • Nichia Cool White LEDs & Warm White LEDs - Up to 530 Lumens
  • Colour Changing Outputs - Cool White, Natural White & Warm White
  • Smooth Dimming Control [HIGH - LOW Brightness] at Each Colour Output
  • Imitating Candle Light Flickering Mode
  • Battery Capacity Indication
  • Switch Protection - Long Press to Turn On
  • Gradual On/Off - Turns On/Off Gradually
  • Removable Cap allows Direct Illumination
  • Rubberized Handle secures Hold with Wet or Gloved Hand
  • Rubberized Housing enhances Impact Resistances
  • Built-in Recessed Hook at Lantern Base for Hanging as Downlight
  • Water Resistant
  • Operation

    [Long Press for ON]
    NATURAL WHITE ON > COOL WHITE ON > WARM WHITE ON > CANDLE LIGHT
    [At each ON mode, press and hold the Operation Button to cycle through HIGH to LOW outputs (blinks at minimum output), release any time for desired brightness]
    [Press OFF if stays at any mode over 3 seconds]

  • Battery Type

    3 x 1.5V D Alkaline Batteries [Not Included]

  • Battery Power Indicator

    Shows Battery Power after Lantern being Turned ON
    Green LED ON - High Power
    Red LED ON - Medium Power
    Red LED FLASHING - Low Power

  • Bulb Type

    6 x 0.5W Nichia Cool White LEDs
    6 x 0.5W Nichia Warm White LEDs

  • Accessory

    Hanging Hook

  • Size

    Ø122mm x 240mm

  • Weight

    858g [With Batteries]

ANSI
NATURAL WHITE HIGH 530 LUMENS 170cd 25m 17h
NATURAL WHITE LOW 100 LUMENS 40cd 12m 250h
COOL WHITE HIGH 350 LUMENS 120cd 22m 33h
COOL WHITE LOW 70 LUMENS 25cd 10m 300h
WARM WHITE HIGH 250 LUMENS 90cd 20m 33h
WARM WHITE LOW 50 LUMENS 20cd 9m 300h
CANDLE LIGHT NA NA NA 190h
* Flashing mode specifications cannot be measured by ANSI FL1 standard.
Flashing mode runtime is based on measurement of battery capacity change only.